The injection molding machine is the most used processing machine in the plastics processing industry. Not only a large number of products can be directly produced by the injection molding machine, but also a key equipment that constitutes the injection-blowing process. In the injection molding process, many companies will find that the temperature of the injection molding machine is too high, and this is actually very harmful to the injection molding machinery, which will bring the following five major hazards:
One of the hazards: causing thermal deformation of the machine. The moving element with different thermal expansion coefficient in the hydraulic component is stuck due to its small training experience, causing malfunction and affecting the transmission precision of the hydraulic system, resulting in poor working quality of the component.
Hazard 2: Causes the viscosity of the oil to drop. If the temperature of the injection molding machine is too high, the viscosity of the oil will decrease, the leakage will increase, and the volumetric efficiency of the pump and the efficiency of the entire system will decrease significantly. Since the viscosity of the oil is lowered, the oil film of the moving member such as the spool is thinned and cut, and the frictional resistance is increased, resulting in an increase in wear.
Hazard 3: Causes the shape of the rubber seal to change. Too high a temperature of the injection molding machine can cause deformation of the rubber seal, accelerate the failure of aging, reduce the sealing performance and lead to the use time, causing leakage.
Hazard 4: Accelerate oil oxidation and deterioration. If the temperature of the injection molding machine rises too high, it will accelerate the oxidation and deterioration of the oil, precipitate the asphalt material, and reduce the lead time of the hydraulic oil. The precipitate blocks the damper orifice and the slit valve port, causing the pressure valve to be stuck and not actuated, the metal pipe being elongated and bent, or even broken.
Hazard 5: The quality of the component work is degraded. If the temperature of the injection molding machine rises too high, the working quality of the component will be lowered, the dissolved air in the oil will escape, and air pockets will appear, resulting in a decrease in the working performance of the hydraulic system.
Led street light, compared with the traditional lighting technology, led lamps and lanterns have higher efficiency, and longer service life.Thus become the preferred bulb type, in order to reduce the energy consumption of indoor/outdoor lighting, get energy saving effect.
For street lamps, higher efficiency and longer life are indispensable for cost reduction.Designed for the LED power supply switch power supply, also must have a high efficiency and durability, to ensure that it has as long as the LED life without maintenance.Here, the resonant converter is one of the most popular power supply topology, this is because compared with previous power supply topology, their performance has brought higher power efficiency, and can reduce EMI.Soft switch is an important characteristic of resonant converter.But the resonant converter used in parasitic diodes (bodydiode) can sometimes lead to system failure.Stored in the parasitic diodes charge must be clear, to avoid large current and voltage surge, including topology structure of high dv/dt and di/dt.
Led Streetlight,Hight Power Led Streetlight,Led Street Lamp ,Led Solar Streetlight
NINGBO ZHENHAI BOLANG METAL PRODUCT FACTORY , https://www.aldiecastings.com