When people were immersed in the joy of the Mid-Autumn Festival holiday, China’s important macroeconomic indicators PIM were also released on schedule. According to data released by the China Federation of Logistics and Purchasing, China's Manufacturing Purchasing Managers Index was 54.3% in September, a slight increase of 0.3% from the previous month, the highest since May last year, suggesting that China's manufacturing activity was the seventh consecutive year. The month is expanding.
We have noticed that since March of this year, China's manufacturing PMI index has remained above 50% for six months. The PMI for the East, Central and West regions, and the PMI index for companies with different types of ownership, such as state-owned enterprises, joint-stock companies, limited liability companies, and foreign-invested companies, show the same trend. This indicates that the regional economy continues to rise and the microeconomic vitality of the company is increasing. Constantly enhanced. If we look at the industry again, 15 of the 20 industries are higher than 50% in September, and 3 industries have reached more than 60%. Obviously, the general pick-up trend in China's industry has basically taken shape.
Since the Fourth Plenary Session of the 17th CPC Central Committee decided to continue to implement a stable economic development goal, central and local government investment continues to occupy the main aspects of social investment, and it still exerts tremendous influence on economic development. With the continuous development of the scale of China's manufacturing industry, especially since the financial crisis, China has introduced a series of industrial revitalization plans, providing tremendous development support for the development of China's manufacturing industry. The U.S. economic forecasting agency IHS/GlobalInsight recently predicted that before 2015, China will exceed the United States in terms of actual industrial added value and become the world’s largest manufacturing country. In 2007, the United States accounted for 20% of global manufacturing, and China accounted for 12%.
However, the largest scale in the world cannot mask the fundamental issues of China's manufacturing industry. At present, the government-supported economic growth has not yet completed the transformation of the economic growth supported by enterprises, residents, and the market, especially since the G20 Summit has been cautious about the recovery of the world economy, indicating that China’s recovery base will also face the pressure of the international market. Not long ago, the State Council and the National Development and Reform Commission and other departments warned against overcapacity, which shows that in the process of maintaining a steady and rapid economy, China faces enormous structural adjustment pressures and needs to increase its efforts to adjust the industrial structure. The failure of our country to transform itself from a manufacturing country to a manufacturing powerhouse is due to the following points.
First of all, most manufacturing companies in China have not established a modern scientific management system. Most companies mainly emphasize stable and balanced mass production in the production process, ignoring the variability of the production process; attaching importance to the construction of hardware facilities, ignoring the improvement of corporate organizational systems and personnel quality. The improvement; heavy production technology, light management technology; attach importance to information, ignore the integrated management.
Second, the product technology content is not high, the development capacity is weak, the technology structure is backward, some key technologies and major technical equipment, the domestic still can not produce, had to be resolved through imports.
Third, the market adaptability of products is poor, the situation that cannot meet domestic demand is more serious, the equipment utilization rate of machinery and equipment manufacturing industry is also very low, and about half of the production capacity is idle.
Fourth, key technologies are basically controlled by people. According to statistics, more than half of large-scale enterprises do not yet have technology development centers. Most of China’s manufacturing equipment is imported, 80% of petrochemical equipment, 70% of car industry equipment, textile machinery, offset printing equipment, CNC machine tools, and optical fiber manufacturing equipment. 100%, 85% of integrated circuit chip manufacturing equipment relies on imports.
Fifth, over the years, the market-for-technical and capital-for-money model has brought huge obstacles to the upgrading of China's industries. In particular, the performance of local governments has made the situation even more serious. Moreover, as China's logistics costs continue to climb, it directly creates a cost disadvantage for China's manufacturing industry. In addition, China's fiscal and taxation system needs to be improved, and the development of human resources and manufacturing industries is not matched.
Sixth, the current energy consumption methods make green manufacturing take a long time to become mainstream. With the development of global trade, China’s market opening will be further expanded. The developed countries will use their technology and other non-tariff measures to continuously maintain their manufacturing advantages. However, under the existing framework, the lack of corresponding measures will make this situation will continue for some time. With the development of global industrial transfer, the manufacturing industry is constantly changing. There has been a shift from a technology-centered approach to a people-centered approach; a transition from multi-level management to a flat network; a shift from a fixed manufacturing organization to a dynamic organization; The shift to a full-scale view of satisfaction; the shift from centralized manufacturing to decentralized networked manufacturing. Most of our country's manufacturing industry is in the early development stage of transformation.
From the perspective of the international environment, the global economy is gradually recovering. However, under the pressure of the unemployment rate continuing to innovate, all countries have used various types of trade protection measures in order to maintain their manufacturing advantages. We have signed tires from President Obama. The case was filed a day before the US Department of Commerce announced the initiation of anti-dumping and countervailing duty investigations on seamless steel tubes imported from China, and it can be deeply experienced that this demonstration of trade protection poses a serious threat to China's manufacturing industry.
Therefore, when China's manufacturing industry continues to recover, it needs to accelerate industrial upgrading.
We have noticed that since March of this year, China's manufacturing PMI index has remained above 50% for six months. The PMI for the East, Central and West regions, and the PMI index for companies with different types of ownership, such as state-owned enterprises, joint-stock companies, limited liability companies, and foreign-invested companies, show the same trend. This indicates that the regional economy continues to rise and the microeconomic vitality of the company is increasing. Constantly enhanced. If we look at the industry again, 15 of the 20 industries are higher than 50% in September, and 3 industries have reached more than 60%. Obviously, the general pick-up trend in China's industry has basically taken shape.
Since the Fourth Plenary Session of the 17th CPC Central Committee decided to continue to implement a stable economic development goal, central and local government investment continues to occupy the main aspects of social investment, and it still exerts tremendous influence on economic development. With the continuous development of the scale of China's manufacturing industry, especially since the financial crisis, China has introduced a series of industrial revitalization plans, providing tremendous development support for the development of China's manufacturing industry. The U.S. economic forecasting agency IHS/GlobalInsight recently predicted that before 2015, China will exceed the United States in terms of actual industrial added value and become the world’s largest manufacturing country. In 2007, the United States accounted for 20% of global manufacturing, and China accounted for 12%.
However, the largest scale in the world cannot mask the fundamental issues of China's manufacturing industry. At present, the government-supported economic growth has not yet completed the transformation of the economic growth supported by enterprises, residents, and the market, especially since the G20 Summit has been cautious about the recovery of the world economy, indicating that China’s recovery base will also face the pressure of the international market. Not long ago, the State Council and the National Development and Reform Commission and other departments warned against overcapacity, which shows that in the process of maintaining a steady and rapid economy, China faces enormous structural adjustment pressures and needs to increase its efforts to adjust the industrial structure. The failure of our country to transform itself from a manufacturing country to a manufacturing powerhouse is due to the following points.
First of all, most manufacturing companies in China have not established a modern scientific management system. Most companies mainly emphasize stable and balanced mass production in the production process, ignoring the variability of the production process; attaching importance to the construction of hardware facilities, ignoring the improvement of corporate organizational systems and personnel quality. The improvement; heavy production technology, light management technology; attach importance to information, ignore the integrated management.
Second, the product technology content is not high, the development capacity is weak, the technology structure is backward, some key technologies and major technical equipment, the domestic still can not produce, had to be resolved through imports.
Third, the market adaptability of products is poor, the situation that cannot meet domestic demand is more serious, the equipment utilization rate of machinery and equipment manufacturing industry is also very low, and about half of the production capacity is idle.
Fourth, key technologies are basically controlled by people. According to statistics, more than half of large-scale enterprises do not yet have technology development centers. Most of China’s manufacturing equipment is imported, 80% of petrochemical equipment, 70% of car industry equipment, textile machinery, offset printing equipment, CNC machine tools, and optical fiber manufacturing equipment. 100%, 85% of integrated circuit chip manufacturing equipment relies on imports.
Fifth, over the years, the market-for-technical and capital-for-money model has brought huge obstacles to the upgrading of China's industries. In particular, the performance of local governments has made the situation even more serious. Moreover, as China's logistics costs continue to climb, it directly creates a cost disadvantage for China's manufacturing industry. In addition, China's fiscal and taxation system needs to be improved, and the development of human resources and manufacturing industries is not matched.
Sixth, the current energy consumption methods make green manufacturing take a long time to become mainstream. With the development of global trade, China’s market opening will be further expanded. The developed countries will use their technology and other non-tariff measures to continuously maintain their manufacturing advantages. However, under the existing framework, the lack of corresponding measures will make this situation will continue for some time. With the development of global industrial transfer, the manufacturing industry is constantly changing. There has been a shift from a technology-centered approach to a people-centered approach; a transition from multi-level management to a flat network; a shift from a fixed manufacturing organization to a dynamic organization; The shift to a full-scale view of satisfaction; the shift from centralized manufacturing to decentralized networked manufacturing. Most of our country's manufacturing industry is in the early development stage of transformation.
From the perspective of the international environment, the global economy is gradually recovering. However, under the pressure of the unemployment rate continuing to innovate, all countries have used various types of trade protection measures in order to maintain their manufacturing advantages. We have signed tires from President Obama. The case was filed a day before the US Department of Commerce announced the initiation of anti-dumping and countervailing duty investigations on seamless steel tubes imported from China, and it can be deeply experienced that this demonstration of trade protection poses a serious threat to China's manufacturing industry.
Therefore, when China's manufacturing industry continues to recover, it needs to accelerate industrial upgrading.
Technical Date of separator machine
1.Filter flux(water pressure0.1Mpa): 1200-1800kg/h.m2
2.Recoil atmospheric pressure(in damp environment): the minimum is 0.6Mpa
3.Back wash pressure:the maximum is 0.3Mpa
4.Combined cleaning pressure of ultrasonic and chemical agent:the maximum is 0.2Mpa
5.Pore diameter range of membrane surface: 1.0µm-15µm
6.Dry weight of processed materials: 0.6-1.6t/h.m2
5㎡ Ceramic Filter Plate,White Ceramic Filter Plate, Porous Ceramic Filter Plate
Rongxin Environmental Protection Equipment Co., Ltd. , https://www.jsrxceramics.com