Special Vehicle Tips: Sludge Picking Tips

Special Vehicle Tips: Sludge Picking Tips

Part of the sewage suction truck is different from other ordinary vehicles when turning. First of all, the tank of the sewage suction truck is loaded with liquid or semi-liquid substances, and in order to facilitate unloading, the suction tank of the sewage suction truck generally has no anti-wave plate. However, when the sewer truck is steering, the sewer water will be concentrated on one side due to inertia and centrifugal force, causing the gravity center of the sewer truck to change. If the suction truck drastically turns at high speeds, it is prone to rollover. How to avoid the sewage suction car rollover? Let the technical personnel of Dongfeng Sewage Sewage Vehicles give everyone a talk.

Don't try to combine the line when the suction truck is in a bend or turn. Because the body of the sewer car itself is in an unstable state, this instability will be exacerbated if the line is attempted. If the sewer truck is driving on a mountain road, it is especially necessary to avoid this situation.
If the curve is wide enough, you can follow the principle of “cutting outside and inside”, or you can call it outside and inside. The radius of the arc that passes through in this way is greater than the radius of the actual curve, that is to say a more sleek turn. The specific method of operation is:
1. Sewage suction truck If the vacuum suction truck is turning right, you can try to stick to the middle of the road before entering the bend, and stick to the roadside as much as possible in the bend. Of course, there is no non-motorized vehicle or pedestrian on the roadside. When you come out of the corner, you slowly drive to the right.
2. Sewage suction truck If the vacuum suction truck is turning left, you can stick to the roadside before entering the bend. When you enter the bend, you can stick to the middle. The premise is that there is no non-motorized vehicle or pedestrian on the roadside. At the corner, they leaned to the right again.
In short, when the sewage suction truck turns, when the situation permits, it is necessary to enlarge the turning radius angle as much as possible. The larger the radius is, the better, and the slower the speed is, the better the steering wheel is. In this way, it is possible to effectively reduce the sewage contained in the sewage suction truck because the inertia and centrifugal force are concentrated to one side, so as to ensure the stability of the vehicle body of the sewage suction truck and avoid the risk of side rollover.


FRP Store Tank

Frp Store Tank,Underground Frp Storage Tanks,Frp Chemical Storage Tanks,Frp Storage Tank

Hebei Chunfeng International Trade Co., Ltd , https://www.chunfengenergy.com