| ROLLÂ FORMINGÂ MACHINEÂ FORÂ YX28-228-1140Â ROOFÂ ANDÂ TILE | |
| Drawing | |
 | |
| Material Specification | |
| Thickness | 0.4mm to 0.7mm |
| Effective width | 1140+/-10mm |
| Feeding width | Approx.1335mm |
| Material | PPGI, Aluzinc, Aluminum |
| Yield strength | 550MPa or customized |
| Â | |
| Machine Components | |
| 5Ton*1250mm Hydraulic Decoiler | |
| Coil inner hole expanding | Hydraulic system, 3KW pump motor |
| Speed regulating | Frequency inverter, 3KW motor |
| Expanding type | Taper wedge expanding system |
| Load capacity | Max.5Tons |
| Coil inner diameter | 510±30mm |
| Coil outer diameter | Max.1600mm |
| Coil width | Max.1250mm |
| Stop/start rotation | Automatic stopping device with limited switch to assist |
| Option | Please refer to Decoiler on home page |
| Â | |
| Entry Roller and Manual Pre-shearing Device | |
| Working thickness | Up to 0.8mm |
| Function | Smart cut control, to cut off the end of the final piece of sheet only |
| Option | Hydraulic pre-shearing device |
| Â | |
| Roll Forming Machine | |
| Polythene film-on device | To avoid scratch on the surface of aluminum while roll forming |
| Driving system | Gear/sprocket |
| Option for driving system | Gear box or toroidal worm box |
| Forming station | 20 stations |
| Roller material | 45# steel, CNC lathes, hard chrome coated |
| Option for roller material | Cr12, Cr12Mov |
| Shafts Diameter | Φ75/Φ95mm |
| Main motor | 11KW |
| Production speed | Approx. 5 to 6m/min while producing 6 meters long profiled sheet |
| Â | |
| Hydraulic Pressiing and Post-cutting Device | |
| Hydraulci pressing | Step height 18mm or customized |
| Cutting type | No Blanking cut |
| Cutting tool material | Cr12, heat treatment |
| Hydraulci pump motor | 11KW |
| Â | Â |
| PLC Control System (2 programmes, one for roof production, the other for tile production) | |
| Function | Control pressing, quantity and cutting length automatically |
| PLC | Siemens |
| Touch screen | Siemens |
| Inverter | Schneider or Delta |
| Encoder | Omron |
| Cut-to-length tolerance | ≤±0.5 mm |
| Control Voltage | 24V |
| Â | Â |
| Product Rack | Un-powered, three units |
| Option | Please refer to Stacker on home page |
| ROLLÂ FORMINGÂ MACHINEÂ FORÂ YX28-228-1140Â ROOFÂ ANDÂ TILE | |
| Drawing | |
| |
| Material Specification | |
| Thickness | 0.4mm to 0.7mm |
| Effective width | 1140+/-10mm |
| Feeding width | Approx.1335mm |
| Material | PPGI, Aluzinc, Aluminum |
| Yield strength | 550MPa or customized |
| Â | |
| Machine Components | |
| 5Ton*1250mm Hydraulic Decoiler | |
| Coil inner hole expanding | Hydraulic system, 3KW pump motor |
| Speed regulating | Frequency inverter, 3KW motor |
| Expanding type | Taper wedge expanding system |
| Load capacity | Max.5Tons |
| Coil inner diameter | 510±30mm |
| Coil outer diameter | Max.1600mm |
| Coil width | Max.1250mm |
| Stop/start rotation | Automatic stopping device with limited switch to assist |
| Option | Please refer to Decoiler on home page |
| Â | |
| Entry Roller and Manual Pre-shearing Device | |
| Working thickness | Up to 0.8mm |
| Function | Smart cut control, to cut off the end of the final piece of sheet only |
| Option | Hydraulic pre-shearing device |
| Â | |
| Roll Forming Machine | |
| Polythene film-on device | To avoid scratch on the surface of aluminum while roll forming |
| Driving system | Gear/sprocket |
| Option for driving system | Gear box or toroidal worm box |
| Forming station | 20 stations |
| Roller material | 45# steel, CNC lathes, hard chrome coated |
| Option for roller material | Cr12, Cr12Mov |
| Shafts Diameter | Φ75/Φ95mm |
| Main motor | 11KW |
| Production speed | Approx. 5 to 6m/min while producing 6 meters long profiled sheet |
| Â | |
| Hydraulic Pressiing and Post-cutting Device | |
| Hydraulci pressing | Step height 18mm or customized |
| Cutting type | No Blanking cut |
| Cutting tool material | Cr12, heat treatment |
| Hydraulci pump motor | 11KW |
| Â | Â |
| PLC Control System (2 programmes, one for roof production, the other for tile production) | |
| Function | Control pressing, quantity and cutting length automatically |
| PLC | Siemens |
| Touch screen | Siemens |
| Inverter | Schneider or Delta |
| Encoder | Omron |
| Cut-to-length tolerance | ≤±0.5 mm |
| Control Voltage | 24V |
| Â | Â |
| Product Rack | Un-powered, three units |
| Option | Please refer to Stacker on home page |
1. The lift must be placed on a solid and flat ground to prevent tipping during operation.
2. Work according to the load specified on the nameplate. Overload is strictly prohibited. In case of emergency, the maximum allowable short-term overload is 10%.
3. Distribute the weight evenly in the center of the table as much as possible. Under special circumstances, allowable eccentric load: the longitudinal eccentric load shall not exceed 1 / 2 of the rated load, and the lateral eccentric load shall not exceed 1 / 3 of the rated load. The eccentric load must be about 300 mm away from the edge of the platform.
4. Materials that are easy to roll, such as pipes, must be blocked or bound properly.
5. It is forbidden to carry people on the lifting platform without manned protection. The lifting platform for carrying people is equipped with railings and anti crack valves. The anti crack valve can prevent the oil pipe from breaking and causing the workbench to fall out of control.
6. Prevent hands, feet and clothes from being squeezed when the elevator is working.
7. Press the "up" or "down" button to raise and lower the workbench. If the workbench does not move, stop the machine immediately for inspection.
8. If the lift does not lift and the overflow valve is heard, stop the machine immediately for inspection. Otherwise, the oil pump will overheat quickly and suffer serious damage. The overflow valve is used to protect the safety of the machine and operators, and cannot be adjusted arbitrarily.
9. Only when the workbench stops moving can the heavy objects be unloaded.
Mini Scissor Platform Lift Table,Mini Scissor Lift,Portable Lifting Table,Manual Scissor Lift Table
zhongcan machinery Co.,Ltd , https://www.zclift.com