(1) HSC carbide end mills
HSC carbide end mills have excellent performance, can significantly reduce the cost of processing, can fully play the function of the five-axis machining center in high-speed milling, and significantly shorten the processing time.
HSC carbide end mill has the following characteristics: 1 high-performance carbide substrate; 2 stable cutting edge for high-speed milling; 3 TiAlN coating with high heat resistance; 4 tool neck diameter smaller than the shank diameter; 5 Tool holder accuracy: h5;6 End mill outer diameter accuracy: φ8mm or less: 0～-0.02mm; φ8mm or more: 0～-0.04mm; Ball head radius accuracy: ±0.01mm; 7 Millable HRC66 and below hardness All workpiece materials; 8φ 16mm end mills have up to 16 teeth.
(2) powRgrip strong clamping handle
In order to give full play to the machining performance of HSC carbide end mills, it is very important to improve the rigidity and precision of the shank, which is also one of the topics for achieving high level mold processing. The newly-developed PowRgrip strong clamping shank is a high-rigidity, high-precision tool clamping system that hydraulically presses a small-tapered collet into a shank to achieve tool clamping and solves the heat existing in the past. The problems of long press-fitting tools, restrictions on the tool shank material, and short tool holder life have increased the rigidity of the shank and the precision of the traverse.
PowRgrip strong clamping handle has the following characteristics: 1 short tool change time (within 10 seconds); 2 long service life (20000); 3 large torque fastening (φ20mm handle: 380Nm); 4 high jump accuracy (3μm or less); 5 Clamping performance has nothing to do with the tool material; 6 knife clip overhang adjustment accuracy is high (within 10μm); 7 Absorbing cutting vibration ability.
Processing example: Milling of S45C carbon steel with a φ16 mm end mill, speed 6000 r/min, feed per tooth 0.1 mm. The machined surface roughness, Ra, of the hot press-fit fixtures, hydraulic fixtures, and powRgrip toolholders were tested separately. The results show that the tool life of the powRgrip toolholders was improved by 180% compared to the thermocompression fixtures. Tool costs can save costs by 44%.
Rigid PP/PE/ABS/PC Pelletizing Machine
Rigid PP/PE/ABS/PC Pelletizing Machine
raw material:PE plastic film
final product: PE granules
output:100-800kg/h
cutting type:water ring
Components included in plastic pelletizing machine :
1.feeding conveyor 2. film compacting machine 3. screw barrel 4.fast speed double post non-stop hydraulic screen changer 5. water flush pelletizing system 6. water cooling trough 7.Centrifugal dewatering machine 8.vibration screen 9. conveying blower 10. store silo
Advantages of this plastic pelletizing machine :
PE/PP recycling granulating machine is special equipment for the PE PP film recycling granulating, it equipped with comacting machine which cound pre- compact the film into smaller granules, then easily feed into screw barrel of extruder, its efficiency is high and can improve production capacity and save labour cost.
it has two vacuum exhuasting mouth on extruder barrel which can fully vent the moisture in the material and hence the final granule quality will be very perfect.
at the end of screw barrel, it equipped with double post fast speed hydraulic non -stop screen changer which can effetively filt out the dirty in the plastic melt.
the pelletizing adopts water flush pelletizing which is easier to operate, and the shape and appearance of granule is good.
Rigid Pp/Pe/Abs/Pc Pelletizing Machine,abs granules Machine,pp pe pelletizing line,abs pellets extruder
zhangjiagang sevenstars machinery co.,ltd , https://www.zjgsevenstarsmachinery.com