New Plastic PVC wire conduit pipe making machine /Â Production Line details:
1. AC motor, ABB frequency speed governor, Japanese RKC temperature controller, Schneider contactor.
2. Screw Nitriding treatment, hardness HV740-940, surface roughness Ra≤ 0.8um.
3. Barrel air-cooled cooling method, nitriding depth of 0.5- 0.7mm, hardness of HV860 or more, the surface roughness Ra ≤ 1.6um.
4. Die head material, High quality steel by quenching and tempering. Structure, Where contact with the materials hard chrome plating. Bolts level, 12.9 high strength bolts.
5. Two Vacuum calibration tank material: Stainless steel.
6. Double Caterpillar adjusting method: Pneumatic compress device.
7. Double cutter: Most cutting times, 20 times/min; With strong waste clean device. Equipped with a meter installation, meter size is accurate.
8. Double stacker: Pneumatic flip, soft rubber, to prevent pipe surface scratch.
9. All electrical parts adopt world famous brand product.
Spcifications:
Item | SJSZ-51 | SJSZ-65 |
Diameter of screw (mm) | 51/105 | 65/132 |
Screw rotation speed (rpm) | 1-45 | 1-35 |
Power of Main engine (kw) | 18.5 | 37 |
Production capacity (kg/h) | 80-150 | 250-300 |
Net weight (kg) | 3200 | 4000 |
Dimensions(mm) (L*W*H) | 3600*1100*2100 | 4235*1520*2450 |
2. MAIN FEATURES
1)Â Â Double screw extruder
adopts long L/D, high efficiency screw, high extrusion capacity, uniformed plasticization. Extruder and haul off machine motors adopt imported AC/DC inverter as speed regulators.Â
2)Â Â Extrusion die headÂ
is spiral type, good calibrating makes good quality pipe production.
Inner heating system, high efficient, easy extrusion. Bronze calibrators can make the pipes fast calibrated and cooled.
3)Â Â Vacuum calibrating tank and water spraying cooling tank
adopts advanced water circulation, high pressure cooling system, installed with vacuum degree adjusting device and automatic water temperature and water level controlling system.
4)Â Â Haul off machineÂ
adopts caterpillar type, which includes two-claw types, three-claw types, four-claw types, six-claw types, eight -claw types, ten-claw types, twelve-claw types etc, suitable for different sizes of pipes.
5) Cutting machine
 Non-scraped cutting, saw cutting or planetary cutting can be applied, accurate cutting, reliable property, high efficiency. Meter-counting device is also installed.
3. OUR SERVICE
We have over 7 years of experience of plastic extruders, for over 7 years our strong point are to design and manufacture efficient, durable and easy to use equipment. Now we have a professional technical team to support our products' update, pre-sales and after-sales service. "Clients first" are our very principle.
Â
Pre-Sales Service
* Inquiry and consulting support.Â
* Equipment pre-commissioning& testing support.Â
* View our Factory.
Â
After-Sales Service
* Machinery warranty time is 12 months starting from the date of Bill of Lading. Electric and electronic parts excluded.
* Training how to install the machine and how to use the machine.Â
* Engineers available to service machinery overseas.
4. CONTACT US
Tony
Qingdao Zhaoxing Extruder Machinery Co., Ltd
TEL: +86 532 82222628Â Â Mobile: +86 13583211497
Â
Remark: All the prices are only for reference; exact price will be based on the latest quotation.
QUANTUM Bucket Elevators have successfully been installed in a wide range of applications and capacities. From process equipment, handling a few kg /hr to over 2000 t/hr with a vast range of materials. Whether your application requires a heavy-duty high capacity machine or an industrial process elevator for your factory.
We have a wealth of experience in designing the correct bucket elevator for your application and have a standard range of elevators, which can be specifically designed for, more specialised applications.
Our elevators have conveyed high temperature, high wear, abrasive, large lumpy, sticky non-flowing materials, as well as free flowing powders and granules. We supply a standard range of twin chain and belt elevators single or twin bucket design for high capacity applications such as grain, minerals and ore. The selection of the elevator depends on the material characteristics and IBS will be able to advise you and select the elevator most suited to your material and your application.
• Gravity elevators
• Positive discharge elevators
• Central discharge slow speed elevators
• Centrifugal elevators
Gravity Type Bucket Elevator
Quantum supply gravity discharge elevators and positive discharge elevators, supplied as close bucket discharge type, central discharge type, or Idler wheel discharge.
Generally a slow speed design gravity bucket elevator is primarily installed for elevating large lumpy & abrasive material. Our standard units are usually chain driven, either friction drive or toothed sprocket.
These elevators offer reliability with minimum wear & a positive discharge emptying of the bucket.
Centrifugal Type Bucket Elevator
Quantum standard range of centrifugal elevators are the most common type of elevator installed to most industries supplied in both belt type or chain type depending on material characteristic and the capacity being elevated and in some case the feeding method of the elevator.
Conveying type
• Segmented tooth sprocket chain type, twin chain or single dropped forged link chain
• Friction chain type elevators, European rolled chain
• Belt elevator. Using rubber belt or 100% polyester solid woven belt, nylon and steel woven belt Typical Construction
• We supply Single leg or Double leg elevators
• Lagged head Pulley
• Slatted return pulley for sticky materials
• Segmented removable sprockets for chain elevators
• Segmented and removable friction pulleys for friction drive elevators
• Fabricated boot and head section assemblies
• Fabricated 3.0m long nominal casings c/w with self-supporting frame and lateral support frames
• Dust tight sealed flanges
• Screw or counterweight tail end take up
Whether the elevator is best suited for toothed sprocket design, friction wheel on conventional belt, IBS will be able to assist with correct selection for the most reliable, maintenance free and cost effective machine to suit your material characteristic and conveying capacity for your particular application.
Types of Buckets readily available
IBS Supply a range of standard off the shelf buckets in a variety of sizes and materials.
Selection of bucket type will depend on material, material characteristics and application. Typical IBS buckets would be plastic-nylon or polyurethane and can be provide FRAS, mild steel fabricated or pressed, stainless steel fabricated or pressed and wear tips for abrasive materials.
Safety and maintenance
• Our equipment is supplied mandatory with anti-roll back device in full load condition
• All inspection doors are fitted with safety limit
• Safety factor of minimum 12: 1 to rated chain pull to installed chain or belt pull under full load stall conditions
For some materials and specific applications, Quantum will design in accordance with Australian standards, suitable explosion venting and will design the structure of the elevator to suit the required application. Typical material that requires this consideration would be sugar, flour, grain and coal.
Standard features for all our bucket elevators
• Qty2 1000mm long inspection doors in conveyor leg and return leg in twin leg elevators for easy inspection of belt or chain and replacement of buckets. Inspection hatch will be provided with bolted mesh screen and safety limit switch
• Qty 2 inspection doors in head section, fitted with safety limit switch• Fully removable split head top section.
• Clean out and inspection doors in Boot section. Self-cleaning boot section optional.
• Under speed sensor and flag disc
• Belt tracking sensor or switch for belt Bucket Elevators
• All our equipment is designed to meet Australian Standards
• Selection of correct conveying velocity and material trajectory for centrifugal elevators is critical to the successful operation of a bucket elevator
• Standard wear plates on boot in-feed and head chute discharge.
• Designed to operate no more than 70% water level of selected bucket at normal operation.
• Installed power capable of full load start up under full bucket surge capacity.
• Our bucket elevators are designed for dust tight design, with suitable dust extraction points
• All our bucket elevators are designed to be self-supporting and are provided with lateral support bracing at approx. 10m centres
Replacement parts service
We can provide a range of standard bucket elevator parts using our standard head and tail pulley assemblies, conveyor belting, elevator butt straps, conveyor bolts and fittings, belt-splicing fittings.
Coupled with our range of standard steel and plastic buckets, elevator chain and fittings, belt tracking switches and sensors we will keep your business moving--
Quantum can provide a customised service contract using experience technicians with many years` experience in servicing and troubleshooting bucket elevators in most states. This service ensures that your equipment is functional to its optimum capabilities and reduces down time parts replacement and potential damage.Our technicians have standard customer maintenance, checking and reporting procedure.
Bucket Elevator,Bucket Conveyor,Elevator Conveyor,Vertical Conveying Elevator
Quantum Conveying Systems Yangzhou Co.,Ltd. , https://www.yzconveying.com