
Following Land Rover and Audi, Beijing Benz announced that it will take the initiative to adjust the price of some service parts from September 1. This is the second time that Mercedes-Benz has lowered the price of its after-sales service. It is reported that in the "Guidance on Soliciting and Promoting the Transformation and Upgrading of the Automobile Maintenance Industry and Enhancing the Service Quality (Draft for Soliciting Opinions)" issued by the Ministry of Communications, it has become a top priority to break through the monopoly of maintenance accessories channels.
Anti-Monopoly Warming 扒扒 猫 猫 扒扒 猫 猫 猫 猫 猫 猫 猫 猫 猫 猫 猫 猫 猫 猫 éšç€ éšç€ éšç€ éšç€ éšç€ éšç€ éšç€ éšç€ éšç€ éšç€ éšç€ éšç€ éšç€ éšç€ éšç€ éšç€
Since most vehicle owners do not fully understand the performance of the vehicle, when the car is being maintained, it often appears that the minor fault is a big fault and the owner is “forced†to replace the new parts. Some car service personnel, by misleading owners to replace new parts, to earn the difference profit. To this end, the first car network prompts the owner, should shop around before deciding whether it is necessary to replace the new parts, to avoid spending more money and eating out.
The owner of the shoddy parts and the old ones who used the old ones to fill some of the new automobile repair and maintenance shops not only confiscated the construction materials, but even refinished the repair parts (mainly some of the discarded parts) and sprayed them into a “new†unscrupulous installation vehicle to repair the vehicles. At the same time, the price of the new owner's accessories is charged, and its profit can reach 50%-80%. For this reason, the first car network prompts the owner to ensure the safety of the car owner, the vehicle, and other car owners, so be sure to remove the replaced used accessories and do not create opportunities for the blackheart repair shop.
Into the store to repair the vehicle was stolen privately Many vehicles need to repair a short time repair is not good, had to stay in the car repair shop, and some black heart repairers secretly used the vehicle into the car as a private car, and even at the intention of delay repair Car time to achieve the goal, accounting for the owner of cheap, this practice has been a lot of car owners deplore. Therefore, the owner should carefully observe during the maintenance process. It is also advisable to pay attention to the odometer and the oil meter before entering the factory. If it is found that the vehicle is seriously used, he must warn the maintenance personnel to avoid being occupied.
Apart from repairing auto parts by repairers without authorization, some black-hearted repairers have made their own claims to dismantle the main parts of the car without the owner’s knowledge and, even worse, refuse the owner to enter the workshop to visit the vehicle during the maintenance process. Maintenance progress. For this reason, the first car network i reminds the owner that during the entire maintenance process of the vehicle entering the store, the owner has the right to know. For some relatively large maintenance work, the owner has the right to require the repairer to explain the entire maintenance process clearly with himself. , so as not to repair the private parts.
List of repairs listed The project was not repaired Some workshop-type repairers often saw parts of the vehicle insurance list that were not repaired because of cutting corners. In insurance claims, the maintenance company’s delivery of the damage report and the actual maintenance project of the insurance company will often be different. Some of the previously reported items do not require maintenance, and some previously undetected failures are also included in the maintenance order. There were differences between the two lists.
Storage Upright Roll Forming Machine
The rack roll forming machine includes one Decoiler, servo feeder, hydraulic punching, roll forming and hydraulic cutting. The products of the rack roll forming machine are used as racks and shelves for supporting the daily commodities in supermarkets and shops.
1.Fast speed
2.Elegant appearance
3.PLC control, full automatic
4.Manufacture as buyer's requirements
Specifications:
Raw Material
Colored steel, Galvanized steel
Material thickness range
1.5-3.0mm
Rollers
18-24 rowa(according to drawings and size)
Material of rollers
45# steel with chromed
Shaft diameter and material
80mm, material is 40Cr
Material of cutting blade
Cr12 mould steel with quenched treatment
Forming speed
6-8m/min(include the punching)
Way of driven
Chain transmission or Gear box
Controlling system
Siemens PLC
Main motor power
15KW
Hydraulic station power
11KW
Voltage
380V/3Phase/50Hz or at buyer's request
Size of the machine
L*W*H 12m*2.0m*1.6m
Working process:
Decoiler - Seven rollers leveling - Servo feeding - Power press - Material guiding - Main roll forming machine
- PLC control system - Hydraulic cutting (45°) - Receiving table
Pictures for machine:
Training and Installation :
1. We offer installation service local in paid, reasonable charge.
2. QT test is welcome and professional.
3. manual and using guide is optional if no visiting and no installation.
Certification and after service:
1. Match the technology standard, ISO producing certification
2. CE certification
3. 12 months warranty since the delivery. Board.
Our advantage:
1. Short delivery period.
2. Effective communication
3. Interface customized.
Storage Upright Roll Forming Machine,Storage Racking Upright Roll Forming Machine,Lms Storage Upright Roll Forming Machine,Punchig Storage Upright Roll Forming Machine
YingYee Machinery and Technology Service Co.,Ltd , https://www.yingyeemachines.com