[China Agricultural Machinery Network Industry News] With the upgrade of the national three emission standards, the 200-horsepower power shift tractors on the market, the development and application of a series of major technologies such as the 400-horsepower continuously variable-speed tractor, the domestic tractors are promoted to large-scale intelligent The important steps in the direction also marked the entry of domestic agricultural tractors into the era of green and automatic “automatic gearâ€. 
Power shift technology is called "automatic gear" in tractors and is a technological revolution. Ning Xuegui, deputy secretary-general of China Agricultural Machinery Industry Association, said that power shifting technology has greatly improved the quality and efficiency of operations, reduced operational difficulty and labor intensity, and reduced fuel consumption. At present, power shift tractors have achieved mass production in China. Compared with conventional models, the operating efficiency has increased by 40% and the average energy saving has been 30%.
Three major technology boosts upgrade
The top priority of the agricultural machinery industry this year is undoubtedly the promotion and application of the national agricultural machinery products. Recently, at the “2016 National Agricultural Machinery Promotion and Application Activity†held in Fuyang, Anhui Province, the 10 national three-horsepower tractors exhibited by China have been eye-catching. "Upgrading of agricultural machinery emission standards is a world trend, and it is also the only way for China's agricultural machinery industry to upgrade. The national three standards are not the goal of agricultural machinery development, and will implement the national four or higher emission standards in the future." Wang Kejun, deputy general manager of China Yituo, accepted The Economic Daily reporter said in an interview.
Use global resources to make domestic tractors boldly go out
Power shift technology is called "automatic gear" in tractors and is a technological revolution. Ning Xuegui, deputy secretary-general of China Agricultural Machinery Industry Association, said that power shifting technology has greatly improved the quality and efficiency of operations, reduced operational difficulty and labor intensity, and reduced fuel consumption. At present, power shift tractors have achieved mass production in China. Compared with conventional models, the operating efficiency has increased by 40% and the average energy saving has been 30%.
At the National "Twelfth Five-Year" Science and Technology Innovation Achievement Exhibition held in Beijing recently, China's one-to-one 400-horsepower continuously variable-speed heavy-duty wheeled tractor was unveiled, representing the high-tech level of the current domestic tractors, especially suitable for the cultivation of large-scale farms. Heavy-duty operations such as shovel and duplex operations, but it takes three to five years to achieve industrial production.
Wang Kejun believes that power shifting and stepless speed change represent the direction of tractor technology development. Power shift tractors are the main products of the world's tractors. In the future, continuously variable speed tractors will gradually replace power shift tractors as leading products. The mass production of power-shift tractors and the development of continuously variable-speed tractors have broken the monopoly of foreign technology and accelerated the pace of transformation and upgrading of China's agricultural machinery industry, which will drive a group of domestic agricultural machinery enterprises to actively develop new products.
Cultivate the agricultural machinery market
The shortage of low-end products and insufficient supply are the prominent problems facing the tractor industry in China. Wang Kejun believes that the development trend of domestic tractors in the future is: the power is shifted from mechanical shifting to power shifting and stepless speed change, and the emission is upgraded to the national three, the national four or even higher standards, and the control develops toward the intelligent direction. However, the formation of the tractor market will take time, and the development of rural reform and fine agricultural development will gradually open up the market.
Affected by factors such as insufficient market demand and adjustment of agricultural policies, the growth rate of the domestic tractor industry has declined in recent years, but the high-power tractor market has performed well. In the first half of this year, the output of tractors in the 130-140 horsepower segment increased by more than 57%, and the output of tractors above 150 horsepower also showed a large increase. With the development of modern agriculture, the demand for operations such as deep ploughing, deep loosening, and straw returning to the field is growing, and domestic tractors will have more room for development. However, the power shift tractor is about 100,000 yuan higher than the same type of ordinary tractor, which affects farmers' willingness to purchase. The agricultural machinery promotion department and users hope that the agricultural machinery purchase subsidy policy can tilt to the domestic power shift tractor.
The reporter learned in the interview that agricultural machinery manufacturers are now worried about whether high-powered tractors can be accepted by users. Liu Huaihong, president of Zhenhong Agricultural Machinery Cooperative, Yinzhou District, Fuyang City, Anhui Province, said that it was said that the three tractors had high requirements on oil quality, difficult service, difficult to buy parts and high sales prices. This year, the cooperative purchased several national three-horsepower tractors, which are highly efficient, easier to work and easier to maintain. In the past, the failure of agricultural machinery relied mainly on experience testing. The three tractors can carry out intelligent detection and remote diagnosis to accurately find the fault point. He said that this year he also plans to purchase several national three-horsepower tractors.
Make the most of global resources
Power shifting and continuously variable tractors are already very mature mainstream products in developed countries, and the gap between China and China is at least 10 years. The domestic R&D and manufacturing technology of tractors has made remarkable progress, but the key core technologies and parts and components are still very backward. The design, manufacturing technology and key component technologies of gearboxes have not yet been mastered, and they still need to rely on foreign countries.
Experts believe that to shorten the gap, domestic tractor manufacturers need to bravely go out, integrate global agricultural machinery resources through international operations, establish R&D centers in developed countries such as Europe, the United States and Japan, and use integrated technology to integrate innovation and break through the development of smart tractors. Bottlenecks in manufacturing technology.
China’s one-way drag is a typical example of “going out†early. In 2011, China Yituo acquired a French factory owned by the Italian ARGO Group and established a research and development center. In September 2013, Yituo's power-shifting heavy-duty tractors with completely independent intellectual property rights were off the assembly line, ending the monopoly of international giants. At present, China's one-wheel power shift technology has been applied to 80 to 400 horsepower tractors.
"While utilizing foreign mature technology, it is also necessary to promote the upgrade of the entire manufacturing system of domestic power shift tractors and continuously variable tractors. With the support of national policies, agricultural machinery manufacturing enterprises must increase investment in scientific research and improve R&D and manufacturing capabilities. Continuous breakthroughs in parts and common technology," said Ning Xuegui.
(Original title: China’s one-way is typical of “going out†early)
The straw bale rotary cutter is composed of base frame, rotary cutter, and feeding and overload protection device, simple construction.
The machine body is made of steel plate material, easy moving and endurable.
The feeding adopts with rotary cutting without dead angle, high efficiency.
The blade of the rotary cutter is sharp and can cut the raw materials into different diameter and length without the influence from the moisture of the bale and tree branches.
The high rate of broken bundle and 10 meter expulsion distance can prevent workers from danger during working and avoid the accident loss,Safe and low cost.
6This machine is widely used in cutting straw, peanut vine, sweet potato vine, corn stalk, cotton stalk, grass, seaweed and all kinds of tree branches, essential equipment for large and medium farm, biomass power station, biogas digester, and biomass fuels plant and so on.
Chaff Cutter,Rice Straw Cutter,Rice Straw Chaff Cutter,Straw Rorary Cutter
Shandong Kingoro Machinery Co., Ltd , https://www.sdkingoromachinery.com