Understand the status of new energy development, inventory of domestic 4 new energy pure electric vehicles

The development of automobiles represents the progress of an era, from scratch, from the beginning of the emphasis on quality to later become more stylish and comfortable. The originally fueled vehicles were polluted too much by the environment, so the car makers and the government turned to the new energy vehicles. Through the efforts and development of the past few years, new energy cars have begun to develop step by step. How is the development of new energy trucks following them new? Today Xiaobian brings 4 pure electric trucks for everyone:

First, Dongfeng pure electric minivan

Dongfeng pure electric van adopts lithium iron phosphate battery, with a top speed of 100 km/h and cruising range of over 150 kilometers. From the exterior design and power form, this car is very suitable for urban logistics and transport, especially its small size, it is very suitable for the last kilometer of walking lanes. The length, width and height of this model: 4015X1595X1900mm, the curb weight is 1.38 tons, and the total mass is only 1.98 tons, so the rated quality is quite limited, only 470 kg.

Second, FAW 55 tons of pure electric tractor

The emergence of pure electric tractors can be a good news for the truck market. In the past, many manufacturers put their targets on pure electric minivans and special vehicles. This time, FAW's 55-ton pure electric tractor was also the first time in the heavy truck industry. FAW's 55-ton pure electric tractor has a top speed of 90 km/h. However, heavy trucks are mostly suitable for long-distance transportation, and this pure electric vehicle can only be used for urban logistics, and charging is also a problem. This pure electric "Black Diamond" battery capacity of 301.1kWh, which is more than 300 degrees, a large battery occupy a lot of space behind the body of the loading space.

Third, BYD T8 pure electric washing vehicle

BYD T8 is the world’s first 16-ton electric sweeper, a new energy sanitation vehicle jointly built by Beijing Sanitation Group and BYD Auto. Its sweeping width can reach 3.5 meters and the maximum speed can reach 85km/h. BYD T8 is equipped with two lithium iron phosphate battery packs, with a total battery capacity of 350Kwh, 300km of battery life, and continuous operation for 7 hours after full power supply. T8 environmental protection design has truly achieved zero pollution and zero emissions.

Fourth, Changan pure electric logistics truck

Changan Ruixing E-M80 adopts a pure electric system and achieves zero emission. It can charge 80% in half an hour, and can fully charge 100% of electricity in 2 hours. It also saves charging time. The last cruising range is 220KM. Chang An Ruixing The length and width of the E-M80 is 4805mm × 1715mm × 1980mm. The battery capacity is 49KwH and the power is 55Kw. Because it is a bread-type truck, this car can only load less than 1 ton of cargo.

Editor's Note: New energy cars and new energy small trucks are in the stage of rapid development, and electric trucks are still a blank in the domestic market, the arrival of FAW 55 tons of pure electric tractors really fill this gap.

Non-woven Fabric Line

Non-woven Fabric lines produce non-woven fabric with polypropylene(PP) and adopt the technology of air drawing into webbing by negative pressure, making into PP spun bond non-woven fabric. These machines are less investment, compact layout, space-saving, simple production technology, easy operation, labor-saving, and good compatibility. The product is featured by the uniform cover, great intensity, good breathable feature, good feeling and so on. It has been widely used in medical and protective products, household and hotel accessories, beauty cares disposable product, agricultural cover, clothes package and architecture and so on.

Technology Advantages:

1) The whole line is well-structured and easy to run.

2) The whole line is highly automated.

3) The control elements are of well-known brands with high performance and reliable technology.

4) The whole line is controlled by PLC and operated with the touch-screen.

5) The allocation of the mainframe and auxiliary equipment can be specially designed and adjusted according to customers requirements.

PP Spunbond Production Line Technical Parameter ( Standard Specification)

FAQ:

Q1: Are you a Manufacture Factory?

Yes, we are direct Manufacture Factory, and our factory has been developed and designed the spunbond nonwoven production line since 2000.

Q2: Do you have any other effective size of spunbond nonwoven machine?

Yes, actually, our factory is able to make any effective size of spunbond nonwoven machine as your requirements. It is typical that our customers ask effective size to be 1600cm, 2400cm and 3200cm.

Q3: Installation and commissioning?

We will send our engineer for installation and commissioning. Also, our engineer will train worker until they could produce the product successfully. But, the relevant cost will be paid by you.

Non-woven Fabric Line,Nonwoven Fabric Line,PP Nonwoven Fabric Line,PP Spunbond Nonwoven Fabric Line,PP spunbond nonwoven machine

Yangzhou Yuyang Nonwoven Machinery Co., Ltd , https://www.yy-machinery.com