Stranding Machine for Charging Pile Cable

QF-630 (1+18+24) planetary type cage twisting machine

1.Application:
Suitable for twisting of bare copper wire, bare aluminum wire, power insulating wire , PVC/PE insulating wire, foaming coaxial wire, kinds of new energy sources  (photovoltaic, wind energy source, charging pile, high-speed rail, nuclear power industrial etc) special cable,  bending endurance and high flexible robot cable, intelligent machine( industrial 4.0 machine) inside control cable, medical treatment cable, elevator insulating wire, composite optical cable, premise cable, and so on.

2.Main technical specification:
2.1 Power supply:380V,50Hz
2.2 Feeding conductor wire diameter: Φ1.0mm~Φ4.0mm
2.3 Feeding insulating wire diameter: Φ2.0mm~Φ6.0mm
2.4 Finished wire diameter:MaxΦ40.0mm.
2.5 Size of bobbin: (1)size of motorized pay-off bobbin: Φ630mm,                   Φ800mm and Φ1000mm
(2) Size of twisting cage bobbin :Φ630mm,
(3)Size of take-off bobbin : Φ2000mm
2.6 Suitable wire : soft PVC, PE insulating wire , rubber wire , foaming
        wire  and bare copper wire, composite optical cable and so on.
2.7 Lay pitch: 50-600mm ±5%
2.8 Rated speed: 15-90r/min
2.9 Machinery centre-height: 1000mm.

3.Equipment structure:
    


 
  QF-630 (1+18+24) planetary type cage twisting machine

1.Application:
Suitable for twisting of bare copper wire, bare aluminum wire, power insulating wire , PVC/PE insulating wire, foaming coaxial wire, kinds of new energy sources  (photovoltaic, wind energy source, charging pile, high-speed rail, nuclear power industrial etc) special cable,  bending endurance and high flexible robot cable, intelligent machine( industrial 4.0 machine) inside control cable, medical treatment cable, elevator insulating wire, composite optical cable, premise cable, and so on.

2.Main technical specification:
2.1 Power supply:380V,50Hz
2.2 Feeding conductor wire diameter: Φ1.0mm~Φ4.0mm
2.3 Feeding insulating wire diameter: Φ2.0mm~Φ6.0mm
2.4 Finished wire diameter:MaxΦ40.0mm.
2.5 Size of bobbin: (1)size of motorized pay-off bobbin: Φ630mm,                   Φ800mm and Φ1000mm
(2) Size of twisting cage bobbin :Φ630mm,
(3)Size of take-off bobbin : Φ2000mm
2.6 Suitable wire : soft PVC, PE insulating wire , rubber wire , foaming
        wire  and bare copper wire, composite optical cable and so on.
2.7 Lay pitch: 50-600mm ±5%
2.8 Rated speed: 15-90r/min
2.9 Machinery centre-height: 1000mm.

3.Equipment structure:
    


 
 

Calstar® Solvent Recovery Machine Recyclable: washing solvent, acetic acid esters, halogenated hydrocarbons, three ethyl chloride, trichloroethylene, solvent oil, isopropyl alcohol, acetone, butanone and cyclohexanone, days that water, wash water gun, banana water, plate washer water, wash water network, wash water, white oil, hand washing water, diluent, washing water, ink cleaning agent, ethyl acetate, toluene, xylene, toluene three, four toluene, banana water, alcohol, ethanol, butanol, two glycol solvent waste and dirty etc..
Calstar® solvent Recovery Machine using the distillation principle: by heating the evaporation of solvent into a gaseous state, the steam into the cooling system to flow out, so that the recovery of organic solvents. So as to make the waste, dirty, old organic solvent recycling, recycling and reuse. Both can save a lot of procurement costs, but also to reduce the pollution of the environment.
Cleaning Agent Recovery Machine,Recyclable solvent,Recoverable solvent species

Methyl Acetate Recycling Machine

Methyl Acetate Recycling Machine,Solvent Recycling Machine,Solvent Recovery Machine,Acetate Recycling

SHENZHEN KUANBAO ENVIRONMENTAL EQUIPMENT CO., LTD , http://www.calstarkb.com