According to Forrester Research, cognitive technologies such as robotics, artificial intelligence, and machine learning will replace 7% of U.S. jobs by 2025, with office and administrative staff the hardest hit.
Robot, artificial intelligence, machine learning, cognitive technology wave but the company is not yet ready
The bad news is the loss of work. The good news is that after cognitive technology is well established, new jobs are derived. However, Forrester said one of the reasons for this is that there will be no major chaos and no immediate disruption, as many companies are not yet ready for a new automated workforce.
16% of jobs in the United States will be replaced, but 9% will result in jobs. Forrester said that by the year 2025, 7% of jobs will be lost.
Emerging jobs will be robotics professionals, data scientists, automation experts and content planners.
Ninety-three percent of automation technicians feel that they are not yet ready for smart machine technology.
83% think that cognitive computing will be the key to their company's future.
Thirty-two percent of respondents said they are ready for a change in cognitive technology for the future, but only 12% are well-positioned to respond to people and organizations.
Forty-six percent said that the number of jobs will remain the same, while 43% think the number of jobs will fall.
Forrester's report quotes a paragraph from the bank's director, UBS Enterprise Architecture:
In our bank, there are already back-end systems making decisions, and 90% of the transactions are automated. Only 10% of the fragmented live. The next step is to deal with clients.
The glue with good performance also has a large change in melt viscosity with temperature. Specifically: when the use temperature rises above 150 degrees, the melt viscosity of the glue can be quickly reduced, so that the coating can maintain proper permeability; and when the temperature of the glue is lowered, the viscosity of the glue can quickly increase. , and quickly solidifies, thus ensuring the effect of rapid limb binding. Hot melt adhesives can maintain good permeability only if they have a suitable melt viscosity, which is very important for glue binding. But too low melt viscosity will cause insufficient amount of glue on the back of the book. The melting degree of hot melt adhesive is more suitable in the range of 4000-5000 centipoise. Good adhesion and penetration performance, that is, when the equipment is running at high speed, the glue must be able to quickly infiltrate the spine of the book, and have excellent cohesion, which can ensure "no wire drawing", and will not crack or fall apart after cooling. In order to achieve this goal, changing the composition of the glue is one aspect. The key is to improve the cohesion and toughness of the base resin, and to introduce strong adhesive force, hard quality, low melt viscosity into the composition, and when the temperature changes up and down, Resins that dissolve or set rapidly. Adhesives with good performance should also have good tensile strength. The phenomenon of loose pages, falling pages, and breaking during the use of adhesive books is directly related to the tensile strength of hot melt adhesives. The tensile strength is usually 20-30kg/cm2. Hot melt adhesives must have good elongation. The elongation at break is high, and the toughness of the hot melt adhesive is good; only with good toughness can the book not be easily broken. The elongation requirement is greater than 300%
Adhesive Binding,Hot Glue For Book Binding,Glue For Paper Binding,Book Binding Glue Spine
GUANGZHOU INTERNET WOOD GLUE MANUFACTURER CO. LTD. , https://www.hotmeltadhesiveiwg.com