Â
Valves Structure features
 The slurry valves all round channel design make it no sediment. Knife plate bottom sharp design blade shape, can cut off soft materials such as fiber, paper pulp and wood pulp. Good opening and closing action can improve the gate seal face, clean sealing surface adhesion, automatic removal of impurities.
2. Stainless steel gate plate to prevent seal leakage caused by corrosion.
3. Short structure save raw materials and installation space, also effectively support the strength of pipeline.
4. Four rods supports save materials and ensure the mechanics performance.
5, the guide block on the valve body make the gate right movement, squeezing block ensure effective seal.
6. Body reinforcement design increased the strength of the body.
7. Slurry valve inside can be made to V shape or triangular shape, to adapt to the fluid control requirements.
8. Slurry valves can be assemble with handwheel, manual zipper, spur gear, bevel gear, pneumatic, electric and electric hydraulic accessories.
9. Working temperature:
Soft seal (NBR) ≤80 ºC          (PTFE): - 40 ºC~180 ºC
Carbon steel: - 29 ºC - 425 ºC     stainless steel: - 40 ºC ~600 ºC
Process Pressure: 0.6, 1.0, 1.6, 1.0, 1.6MPa
Â
Application:
Pulp, wood pulp, fiber, dust, chemicals sewage and slurry etc.
Â
Products Features:
Compact design, small volume, light weight, cheap price, easy to installation, wear proof, anti-blocking, easy maintenance and long service time. Various motor device is selectable.
Z73X gate valve installation
Trouble shooting
| Potential faults | Faults reason | method of troubleshooting |
| Seal leakage | Seal ring impurities | Clean seal ring |
| Damage of the sealing | Replace seal ring | |
| upper seal leakage | Upper seal packing loose | Screw down packing or cover bolt |
| Upper filling degradation | Oiling or replace the filling | |
| Flange surface | The bolt haven't be tighten equally | Tighten the bolt with equally force |
| Flange seal invalidation | Replace flange gasket | |
| switch jam | Driving device to dry | add lubricants to the driving device |
| switch malfunction | Driving device damage | Replace driving device or repair by professional people |
Installation and usage
1. Before installation, must check whether the valve model meets the demand of the working conditions.
2. Teflon or rubber such soft seal type, must check confirm sealing surface and inside clean.
3. Before installation, must leave enough operating space for valve.
4. For electric valve or electric hydraulic control valve, when out of factory, the valve was debugging well. When use the first time, to prevent wrong wiring, please manually open the valve to full open or half open state, and then power on with no-load to test.
5. Air (hydraulic) control valve must ensure the valve have enough gas (hydraulic) pressure.
6. When installation, the bolts should be uniform tighten.
7. When installation, Avoid bumping the valve or screw valve components at will.
8. If the valve top seal outside, must be regular filling sealing oil.
9. In dry areas, if the valve actuator is spur gear, filling oil regularly.
Â
Â
Tianjin U-ideal Instrument Co., Ltd
Tel: +86 22 88971536Â Â
Adds: No.818 Jingu road Jinnan, Tianjin China
Would you like to get more products information or order it, please call me, or click Inquiry Now to fill in the Form.
It helps you get more informations you need to trade confidently with suppliers.
Related products: Gate Valve Ball Valve Check Valve Globe Valve Butterfly Valve Knife Gate Valve
Tungsten carbide mixed Metal Alloy Powder is commonly used in PTA (Plasma Transferred Arc) welding. PTA welding is a process that involves the deposition of a hardfacing material onto a base metal to provide wear resistance, corrosion resistance, and improved mechanical properties.
Tungsten carbide is a very hard and wear-resistant material, making it ideal for applications where high abrasion resistance is required. It is often mixed with other metals, such as nickel, cobalt, or chromium, to form a metal alloy powder. These metal alloys enhance the properties of the tungsten carbide and improve its compatibility with the base metal.
The tungsten carbide mix metal alloy powder is typically fed into the PTA welding torch, where it is melted and propelled onto the surface of the base metal using a high-energy plasma arc. The molten powder forms a hard, dense coating that bonds with the base metal, providing excellent wear resistance and protection.
The specific composition of the tungsten carbide mix metal alloy powder can vary depending on the application requirements. Different ratios of tungsten carbide and other metals can be used to achieve desired properties, such as hardness, toughness, and corrosion resistance.
Overall, tungsten carbide mix metal alloy powder is a versatile and effective material for PTA welding, offering superior wear resistance and protection for various industrial applications.
Mixed Powder,Arc Welding Powder,Pta Welding Powder,Plasma Welding Powder
Luoyang Golden Egret Geotools Co., Ltd , https://www.xtchvof.com