Refers to the use of natural trees as raw materials, making and designing structures that are pristine and durable. The surface processing and protection of the workpiece is also relatively simple, such as brush varnish, wax protection, etc., in order to maintain the original texture of the original wood or reflect the true texture of the wood after the vertical and horizontal cutting, reflecting the original appearance of the wood, expressing the return of the original return Natural means that the wood is warm, simple, warm, and the season is pure and cold. Thanks to the thick mellowness of the logs, the home is transported back to the original appearance of the ecology, so it is called the original wood furniture.
Here are some points to note when consumers are using log furniture: First, before welcoming the log furniture home, the home environment must be cleaned up, especially before the second house is cleaned. When the new furniture is positioned, wipe it with a dry or wet rag. When used for a period of time, it is recommended to do maintenance work every 2 months.
1. Refinishing the paint If the furniture finish is damaged by burning, put a thin hard cloth on the toothpick, gently wipe the marks, then apply a thin layer of wax, and remove the burn marks; if the furniture finish To scratch, use a crayon or paint that matches the color of the furniture, apply it to the wound surface of the furniture, cover the exposed background, and then apply a thin layer of clear nail polish. If the wax drops on the furniture surface, Do not scratch with sharp or nails. Wait until daylight is good. Use plastic sheeting. Hold your hands tightly and tilt forward. Slowly wipe off wax oil from the front of the body and wipe off with a fine cloth.
2. After the drum surface has been bubbling on the surface of the furniture, you can use a sharp blade to cut a knife in the direction of the grain in the middle of the bubble. Then use a syringe to inject the glue into the seam and use your fingers to gently press on the upper part of the bubble. The spilled glue is wiped clean with a damp cloth and then pressed with a weight that is smooth on the bottom surface and larger than the bubbling area. In order to prevent a small amount of glue from overflowing after the pressurization, the peripheral surface of the blisters may be damaged, and the blisters may be covered with a plastic film, so that the decorative veneer is smoothed.
3. Eliminate water marks on the furniture. If you do not dry it immediately, it will leave traces of water marks. In this regard, a wet cloth can be used to cover the traces, and then carefully pressing the wet cloth with the electric iron several times. The moisture of the trace will evaporate due to heat, and the water mark can be eliminated.
4, repair dents Some furniture due to wood is soft, will leave a dent after the collision. At this time, you can use a wet towel in the depression, and then use an iron to heat and iron, and you can restore the status quo. If the dent is deeper, add the filling.
5, remove the old paint If you want to remove the furniture paint, paint can be applied to the paint on the furniture surface, you can remove the old paint. After washing and drying, smooth it again with fine sandpaper to repaint it.
6, repair cracks solid wood furniture such as due to hot rising shrinkage cracks, the following remedial measures can be used; the old cotton or broken sack burned ash, and then mix with raw Tung oil into a paste, embedded in the cracks in the wood, after drying Can fill up and stick firmly. Or, tear the newspaper into pieces. Add some alum and clear water, boil a thick paste, cool it and apply it to the cracks in the wood. After drying, it is very firm.
Here are some points to note when consumers are using log furniture: First, before welcoming the log furniture home, the home environment must be cleaned up, especially before the second house is cleaned. When the new furniture is positioned, wipe it with a dry or wet rag. When used for a period of time, it is recommended to do maintenance work every 2 months.
1. Refinishing the paint If the furniture finish is damaged by burning, put a thin hard cloth on the toothpick, gently wipe the marks, then apply a thin layer of wax, and remove the burn marks; if the furniture finish To scratch, use a crayon or paint that matches the color of the furniture, apply it to the wound surface of the furniture, cover the exposed background, and then apply a thin layer of clear nail polish. If the wax drops on the furniture surface, Do not scratch with sharp or nails. Wait until daylight is good. Use plastic sheeting. Hold your hands tightly and tilt forward. Slowly wipe off wax oil from the front of the body and wipe off with a fine cloth.
2. After the drum surface has been bubbling on the surface of the furniture, you can use a sharp blade to cut a knife in the direction of the grain in the middle of the bubble. Then use a syringe to inject the glue into the seam and use your fingers to gently press on the upper part of the bubble. The spilled glue is wiped clean with a damp cloth and then pressed with a weight that is smooth on the bottom surface and larger than the bubbling area. In order to prevent a small amount of glue from overflowing after the pressurization, the peripheral surface of the blisters may be damaged, and the blisters may be covered with a plastic film, so that the decorative veneer is smoothed.
3. Eliminate water marks on the furniture. If you do not dry it immediately, it will leave traces of water marks. In this regard, a wet cloth can be used to cover the traces, and then carefully pressing the wet cloth with the electric iron several times. The moisture of the trace will evaporate due to heat, and the water mark can be eliminated.
4, repair dents Some furniture due to wood is soft, will leave a dent after the collision. At this time, you can use a wet towel in the depression, and then use an iron to heat and iron, and you can restore the status quo. If the dent is deeper, add the filling.
5, remove the old paint If you want to remove the furniture paint, paint can be applied to the paint on the furniture surface, you can remove the old paint. After washing and drying, smooth it again with fine sandpaper to repaint it.
6, repair cracks solid wood furniture such as due to hot rising shrinkage cracks, the following remedial measures can be used; the old cotton or broken sack burned ash, and then mix with raw Tung oil into a paste, embedded in the cracks in the wood, after drying Can fill up and stick firmly. Or, tear the newspaper into pieces. Add some alum and clear water, boil a thick paste, cool it and apply it to the cracks in the wood. After drying, it is very firm.
This Retractable Ceiling Fan has LED module which can switch to different color of light, such as warm light 2500 K, natural light 4500 K and cool light 6000 K. Also this retractable ceiling fan has remote control can allow the owner control the light setting and wind speeds on any where in the house.
Retractable Ceiling Fan With Light,Retractable Ceiling Fan With Light Kit
ZHONGSHAN UFAN ELECTRIC APPLIANCE CO. LTD , https://www.ufanelectric.com