Truck tires While actively protesting, the Chinese government is also aware that the removal of excess capacity has become an urgent issue in various production sectors in China. The 13th Five-Year Plan also proposes policy guidelines for capacity reduction and destocking. Promulgated a series of green tire industry standards and technical specifications such as "green tire technical specification", "green tire environmental protection raw material guide" and "green tire labeling system". In 2014, the Green Tire Industrialization Promotion Committee and the Green Tire Technical Support Center were set up to co-ordinate the development of technical standards and tire grading methods for the green tire labeling system, and to promote the industrialization of green tires.
At present, domestic green tires have attracted the attention of many companies. Green tires have the advantages of good elasticity, low rolling resistance, low fuel consumption, low heat generation, wear resistance, puncture resistance, large carrying capacity, and comfortable ride. Compared with traditional tires, it highlights many advantages such as environmental protection, energy saving, new processes, and new materials. Green tires have become an era product. It is imperative to produce green tires instead of old tires. After the popularity of green tires, the former tires will be eliminated and updated, and some high-cost and over-consumption tire manufacturing will be reorganized and merged. From a certain level, it avoids overcapacity and enhances the characteristics of the tire. Through the popularization of green tires, most consumers in the market have a certain awareness of green tires, and green tires tend to be omnipresent in the market from the low end to the high end. Let the tire market find a chance in the original desperation.
Green tires can benefit both the environment and the driver. On the one hand, the adverse impact on the environment is minimized, and on the other hand, fuel costs can be saved for consumers. This kind of tire is more suitable for the needs of development. Through a series of cutting-edge technologies, green tires can be applied to various areas. At present, all domestic major tire factories are guided by green tires, and they have taken a big step toward green tire manufacturing. Green tires have been widely recognized internationally and have become another strategic development goal for China's tire industry.
Living garbage disposal equipment
With the development of increasingly urbanization , the amount of garbage increased geometrically. Incineration method gradually lost the market since the dioxin and toxic produced by incineration causing irreversible effects on the environment, and for landfill, some garbage is difficult to degrade, which even takes hundreds of years, we cannot afford this even though China has a vast territory, because land is a valuable non renewable resources.
After continuous efforts, Shangqiu Jinpeng industrial Co., Ltd developed a special biomass pyrolysis equipment for domestic waste treatment. After treatment by the equipment, can get about 20% of the oil profits from domestic waste, and in the process, through the low temperature anaerobic biomass pyrolysis of domestic waste harmless treatment, to ensure environmental health.
Flow chart for living garbage disposal equipment
Living garbage disposal equipment has two system:
1. Garbage Sorting System
The equipment is applied to separate organic waste and inorganic waste from large-size refuse and processing them separately.
2. Biomass Pyrolysis Equipment
2.1 The combustible waste after sorting and shredding such as life rubber, plastics and knitted fabrics is conveyed into the low-temperature and anaerobic biomass decomposing processor. Through catalyzing and heating, oil gas is produced and then condensed into oil mixture by condenser. The remaining that can`t be liquefied is processed through gas purification system and then used to generate electricity by gas generator. The smoke after burning goes into smoke scrubbers so as to remove acid gas and dust, and then is discharged through chimney when it reaches relevant environmental standards. The residue from biomass decomposition is conveyed into carbon black collecting tanks through sealed screw, without any pollution.
2.2 The technical parameter of Biomass Pyrolysis Equipment
|
NO. |
ITEM |
Technical Parameter |
|
1 |
Suitable Raw Materials |
Small pieces of Waste tire, rubber, waste plastic≤5cm |
|
2 |
Operating Mode |
Fully Continuous Operation |
|
3 |
Structure |
Horizontal Type Revolve |
|
4 |
Loading and discharging |
Fully automatic feeding and discharging under high temperature at same time |
|
5 |
Capacity(24h) |
20-40Mt |
|
6 |
Work Pressure |
Slightly Negative Pressure |
|
7 |
Oil Yield of tyres |
40%-45% |
|
8 |
Reactor Rotational Speed |
1R/M |
|
9 |
Installation Power |
110kw/h |
|
10 |
Cooling Method |
Cycle water |
|
11 |
Type of Drive |
Sprocket Wheel |
|
12 |
Heating Method |
Direct |
|
13 |
Noise dB(A) |
≤85 |
|
14 |
Main Reactor Weight (MT) |
About 20Mt |
|
15 |
Total Weight(MT) |
About 45Mt |
|
16 |
Installation Space Required |
60m*20m |
|
17 |
Manpower |
2/shift |
|
18 |
Shipment |
5*40HQ |
|
19 |
Delivery time |
≤70Days |
Living Garbage Processing Equipment
Municipal Waste Recycling,Garbage Recycling Machine,Waste To Energy
Shangqiu Jinpeng Industrial Co., Ltd. , https://www.recyclingthewaste.com