Second, the auxiliary shaft system, the auxiliary shaft system, the auxiliary well shaft and the bottom hole yard connection (Matoumen), the main drainage pump room (central pump house), the water tank and the cleaning water tank chamber, the main transformer (central substation) and waiting room.
Third, other diverticulum diverticulum has a dispatch room, medical room, wired motor garage and repair room, battery motor garage and charging chamber, fire door chamber, waterproof chamber, underground gunpowder library, fire material library, people Station, etc. The location shall be determined according to the layout of the line and the respective requirements. For example, the charging chamber shall have a separate air duct connected to the total return air duct; the fire door chamber shall be located at the junction of the inlet shaft and each level of the lift platform, and It does not hinder the passage of lift, transportation and personnel when opened.
There are single standard designs for the trolleys, diverting chambers, coal bunkers and loading chambers, cleaning of the bottom chambers and inclined lanes, motor vehicles and repairs, dispatching rooms, and auxiliary shafts and yard junctions. use.
Due to the location of the underground gunpowder warehouse and the ventilation system, the underground gunpowder warehouse should be selected in a location that is dry, well ventilated, convenient to transport, and easy to arrange for returning to the air duct. The necessary safety distance should be obtained from the important tunnel and the diverticulum of the wellbore and the bottom hole yard. . The gunpowder warehouse should have a separate inlet airflow, and its return air duct is connected with the mine's total return air passage to ensure independent ventilation. The ventilation system of each mine is not the same. The capacity of the gunpowder warehouse is not completely dependent on the well type of the mine. It is not indicated on the floor plan of the bottom hole. The design unit can select the standard and waste meter of the gunpowder library according to the actual situation and determine its location.
Suspended platform, as temporary suspended cradle platform, are widely applied in maintenance applications such as curtain fecade cleaning in high rise building, painting, glazing repairs, bill- board painting, cable installation and other outer working of high rise building up to 150 meters about 30 floors high. Our ZLP series suspended platform cradle, ZLP1000, ZLP800, ZLP630, ZLP500, ZLP400 and ZLP150, are good choices for fulfill above outside of wall work. Based on the different materials, the suspended platform could be divided into Aluminum Working Platform, steel Working Platform, galvanized Working Platform.
ZLP series temporarily installed suspended platform is an ideal access equipment for building facade construction, decoration, cleaning and maintenance. It can be also applied to other aerial working such as elevator installing, ship building, construction of dam, bridge, large chimney, etc.
This equipment is easy to operate, convenient to move and reliable in safety and much more efficient than traditional scaffolding.
Suspended Working Platform,Suspended Cradle Platform,Aluminum Working Platform,Suspended Construction Platform,Working Platform Cradle
SHEN YANG BAOQUAN BUSINESS CO., LTD , https://www.sytoplesstowercrane.com