Since the ban on the sale of 100 watts and more incandescent lamps in China, the LED lighting market seems to have been shot a strong shot, and sales are gradually rising. However, the relevant departments found in a random inspection that the rate of failure of energy-saving lamps was as high as 68.75. The reporter visited a few days ago and found that the price of LED lamps of different brands is very different. Since there are no relevant standards at present, the uneven quality of the products also allows consumers to buy and look like flowers.
It is said that the energy-saving lamps are not energy-saving. It is understood that the state has encouraged the use of energy-saving and environmentally-friendly products in recent years, and has introduced relevant subsidy policies. Compared with traditional lighting fixtures, energy-saving lamps are increasingly popular among consumers because of their energy-saving and environmentally friendly features. Due to the low entry barrier of the energy-saving lamps market, the process is relatively simple, and the quality of the products is mixed, many consumers cannot identify their advantages and disadvantages.
The disparity in the price difference of LED lamps is too big for people to understand. The relevant departments found in a sampling inspection that the unqualified energy-saving lamps mainly have problems such as product marking, protection against electric shock, mechanical strength, lamp power, and energy efficiency. This not only has the potential to affect human health, but is also likely to cause a risk of electric shock, posing a threat to consumers' lives.
The reporter found that the unqualified rate of the energy-saving lamps being sampled was as high as 68.75, and the energy efficiency labels of 11 products did not meet the requirements of the CEL-005 implementation rules. That is to say, the energy-saving lamps in these markets are known as energy-saving, but they are not in line with the publicity.
Relevant personnel explained that the main problems in the failure of energy efficiency labeling are summarized as follows: First, the product specification model is inconsistent with the energy efficiency label, second, the product nominal power is inconsistent with the energy efficiency label, and third, the energy efficiency label size does not meet the standard requirements, and the fourth is the actual measurement. The initial luminous efficacy does not meet the required energy efficiency rating requirements. Fifth, the measured initial luminous efficacy does not meet the initial luminous efficacy requirements.
The reason is mainly because some small enterprises have low level of technology research and development, and product performance indicators cannot meet the standard requirements. At the same time, the enterprise did not know enough about the energy efficiency label, and even did not pay attention to it, resulting in the energy efficiency label not meeting the requirements.
Price confusion business statement is not the same reporter visited the city's several professional lighting market yesterday, most businesses have LED lighting as the main product for sale.
However, the reporter found that the price difference of LED lamps of different brands is very different. Take 9-watt LED spotlights as an example, the price ranges from 20 yuan to 200 yuan.
In general, good quality LED spotlights are brighter and more penetrating. A merchant pointed to his own LED spotlights and told reporters that the price of 60 yuan is brighter than the price of 40 yuan.
However, another merchant’s statement is just the opposite. After giving a demonstration to the reporter, the merchant pointed to a slightly darker LED spotlight, indicating that the lighting is softer and more visually comfortable, and the quality is better, so the price is relatively darker. More expensive.
In terms of service life, many merchants claim that the life of LED bulbs can reach 20,000 to 30,000 hours, and the life span of families is 8 to 10 years. However, the reporter saw that the shelf life of most LED lamps and packaging is only two years.
There is no national standard quality is uneven. Industry experts say that China's LED market enterprises are scattered, the number of brands may be as many as a thousand, but there are not many brands that are truly trustworthy. The quality of products below 30 yuan is difficult to guarantee.
At present, there are three main problems in domestic LED home lighting. First, the use of aluminum heat sink, if not attached to the LED chip, directly affects the service life; second, the adjustment of brightness requires a controller, the quality of the controller itself is uneven; the third is for the drive power A core technology, only a few companies are willing to increase investment in scientific research. A person in charge of a well-known brand lighting Daqing area said.
For home use, the most important thing is to use power and life, and these indicators can only be measured with professional instruments. It is difficult for ordinary consumers to identify the quality of products only through sales personnel demonstrations.
The staff of the relevant departments said that at present, there is no uniform standard for China's LED industry, and the quality of the products is uneven.
As China's semiconductor lighting industry is in the early stage of development, the technological route changes rapidly and the product performance improves rapidly, which makes the pace of some product standards unable to keep up with the development of product performance, and the formulation of basic standards such as reliability test methods requires more in-depth research. Therefore, the development of LED lighting standards requires a longer period.
CNC Machining is a manufacturing process where computers run programs that control how the machines will manufacture parts. These CNC Programs using CNC Software can control everything from the motions the machine makes to spindle speed, turning coolant on or off, and much more. The computer language used to program CNC Machines is called [G-Code". To make it easier, g-code is seldom written by hand. Instead, visual programming tools called CAM Software are used to create the g-code.
Machined parts are often chosen when manufacturing must result in high precision or quality, or when the materials are particularly tough and hard to work.
There are many different kinds of CNC Machine including 3D Printers, CNC Mills, CNC Lathes, CNC Lasers, Water Jets, Electronic Discharge Machines (EDM`s), CNC Routers, and more.
Benefits of CNC machining
1) Lower labour costs
2) CNC increases production choices
3) No need for extensive skills or experience
4) Reproduce your product range endless times
5) No costly prototypes required
We have made many aluminum parts by CNC process, these parts are commonly used in industry, automotive, consumer, electrical field. specially, we ever made kinds of componets that used in automotive field and have the 2nd process treatment( such as anodization, Powder Coating, spary coating), we can ensure the best quality sample with lower price to you to make sure you are ok with sample and glad for production.
Cnc Machining,Cnc Machining Services,Custom Cnc Machining,Cnc Cutting Services
Suzhou FCE precision electronics Co., LTD , https://www.fukeyifcesz.com